Standing rigging:

In 5/32” and 1/8” 1x19 S/S wire and turnbuckles including toggles where needed.

Running rigging:

Main and jib halyards in 3/32” 7x7 S/S wire with rope tails. Topping lift in 2/32: 1x19 S/S wire. Main and jib sheets in 3/8” braided tacron.

Sails:

Main (with quick-reefing) and jib in white 5 ox. Dacron-terylene with insignia, sail number, battens and sailbag.

Interior:

Four full-length berths (2-6’6”, 2 –6’3”) with 3” vinyl or cloth covered foam mattresses. Galley unit includes: Folding table and 9 sq. ft. arbourite counter top with built- in 2 ½ cu.ft. Self-draining icebox. Cutlery drawer and shelves with teak trim. S/S sink and drain with through-hull seacock. 5 Gal. Freshwater tank and pump. Gravity fed alcohol stove. Separate toilet and hanging locker with folding door and privacy curtain. Portable toilet with holding tank. Stowage lockers under all berths. Cabin sole and bunk sides carpeted. Two teak bulkheads separating main cabin, toilet, hanging locker and fore cabin. Built-in 40 cu.ft. of positive foam flotation.

  Hull and Deck:

Single unit fiberglass hull, hand-laid throughout, alternated with roving. Interior ballast. Single unit fiberglass deck. Hull and deck double glassed into one unit. Cabin top and cockpit reinforced on all nonskid areas. Combined fiberglass sail and anchor hatch. Foredeck hatch. Main companionway hatch and drop boards. Cockpit locker hatches (P/S) with lockable safety hasps. White vinyl rubrail around gunwale. Teak handrails. Teak toe rails.

Standard Colours:

White, off-white, ivory, yellow, red and light blue.

Outboard rudder:

In fiberglass. Lifting laminated ash tiller with extension. S/S gudgeons and pintles.

Spars:

In aluminum with integral sail track and gate. S/S masthead, shroud tangs, spreader bases and hinged mast step. Aluminum spreaders and cleats.

 

Deck fittings:

Two bow chocks. Bow mooring cleat. Two stern mooring cleats. Screened ventilator in fore hatch. Boom vang. S/S jib track, adjustable slides and non-tumbling blocks with jib sheet winches and clam cleats. Screened vents in companionway drop boards. Four windows in main cabin, tow in fore cabin. Mainsheet block 1:4 purchase and jamb cleat. Retractable out board bracket to lift optional 6 – 9.9 h.p. outboard motor out of the water.

 


Optional equipment:

Foresail - $102.50
Genoa - $278.00
Steel cradle - $225.00
Genoa gear (incl. Winches) – 194.50